DVRT-Link – LXRS 

The MicroStrain DVRT-Link® provides wireless data acquisition from all MicroStrain DVRT® linear displacement transducers.

• 1 differential input from a DVRT bridge transducer
• Sample rates from 32Hz to 2082Hz

SG-Link – LXRS 

SG-Link® -LXRS® offers standard wireless displacement configuration for test and measurement applications.  Ruggedized enclosures are available for extreme exposure and long-term monitoring.

• 1 input channel for DVRT strain gauges or potentiometer
• 1 differential input
• Sample rates up to 4KHz in burst mode, 500Hz continuous
• 1 input channel for 4-20mA sensor by measuring voltage across optional internal 56 Ohm resistor (requires external power)

MG-DVRT 

Designed specifically for tight spaces, the Microminiature Gauging DVRT® delivers sub-micron gauging linear displacement in a tiny package.

• Internal spring gauging design
• 1.7mm outside diameter
• Miniature gauging stroke lengths include 1.5mm, 3mm, 6mm, & 9mm
• Sample rate up to 20 kHz
• Operating temperature to 175C”

SG-DVRT

The Subminiature DVRT® features sub-micron resolution, linear analog output, flat dynamic response to kHz levels, and very low temperature coefficients.

• 4.76mm outside diameter.
• Subminiature stroke lengths include 4mm, 6mm, 8mm, 24mm, & 38mm
• Sample rate up to 20 kHz
• Operating temperature to 175C

NC-DVRT 

Ideal for difficult sensing applications, MicroStrain’s Non-Contact DVRT® displacement transducer is designed to measure the displacement and proximity of a metal target without physical contact.

• Non-contact linear displacement
• Sample rate up to 20 kHz-Operating temperature to 175C

SG-Link-RGD -LXRS

ENV-Link – Mini – LXRS

ENV-Link™ -Mini -LXRS® environmental sensor node supports four sensor inputs inluding a dedicated digital relative humidity and temperature sensing channel.

• IP-67 rated enclosure for long-term outdoor use
• Surface mountable relative humidity and temperature sensor
• 3 additional 0-5 VDC  inputs supports soil moisture, leaf wetness, carbon dioxide, pyranometer, barometric pressure, and additional sensors

V-Link-LXRS 

V-Link® wireless node is designed to accept up to four load cell differential inputs, digitize sensor output with 16 bit resolution, and transmit load data to a remote WSDA gateway.  Event driven triggering features allows users to maximize battery life while monitoring vital pre- and post- event loads. Standard configurations are available for test and measurement applications.  Ruggedized enclosures are available for extreme exposure and long-term monitoring.

• 4 differential inputs for full, half or quarter bridge load cells
• 16 bit A/D converter
• Event triggered dat with 200,000 byte pre-event memory
• 1 input channel for 4-20mA sensor by measuring voltage across optional internal 56 Ohm resistor (requires external power)

SensorCloud

SensorCloud™ is useful for a nearly limitless variety of applications, particularly where data from large sensor networks needs to be collected, viewed, and monitored remotely.  Structural health monitoring and condition based monitoring of high value assets are applications where commonly available data tools often come up short in terms of accessibility, data scalability, programmability, or performance.    MicroStrain® SensorCloud was born out of a need for a better tool for these types of applications but the core features and benefits can add value to a much broader range of applications.